Biodegradability & Compostability

Bioplastics can take different length of times to totally compost, based on the material and are meant to be composted in a commercial composting facility, where higher composting temperatures can be reached and is between 90-180 days. Most existing international standards require biodegradation of 60% within 180 days along with certain other criteria for the resin or product to be called compostable. It is important to make the distinction between degradable, biodegradable and compostable. These terms are often (incorrectly) used interchangeably.

Compostable Plastic is plastic which is "capable of undergoing biological decomposition in a compost site as part of an available program, such that the plastic is not visually distinguishable and breaks down to carbon dioxide, water, inorganic compounds, and biomass, at a rate consistent with known compostable materials (e.g. cellulose). and leaves no toxic residue." American Society for Testing & Materials (ASTM). In order for a plastic to be called compostable, three criteria need to be met:

1. Biodegrade - break down into carbon dioxide, water, biomass at the same rate as cellulose (paper).
2. Disintegrate - the material is indistinguishable in the compost, that it is not visible and needs to be screened out
3. Eco-toxicity - the biodegradation does not produce any toxic material and the compost can support plant growth.

Biodegradable Plastic is plastic which will degrade from the action of naturally occurring microorganism, such as bacteria, fungi etc. over a period of time. Note, that there is no requirement for leaving "no toxic residue", and as well as no requirement for the time it needs to take to biodegrade.

Degradable Plastic is plastic which will undergo a significant change in its chemical structure under specific environmental conditions resulting in a loss of some properties. Please note that there is no requirement that the plastic has to be degrade from the action of "naturally occurring microorganism" or any of the other criteria required for compostable plastics.

A plastic therefore may be degradable but not biodegradable or it may be biodegradable but not compostable (that is, it breaks down too slowly to be called compostable or leaves toxic residue).

Estimated Composting Times


The rate of biodegration for different biocompostables is dependent upon the composition and thickness of the material as well as composting conditions. Commercial composting facilities grind the materials, turn over the piles and reach high temperatures, thus reducing the amount of time it takes to compost and, is thus, the recommended method for composting these products. Home composting rates are slower and can vary, depending on how frequently the pile is turned over, the moisture and material content and the temperature.

Standards
There are currently few international organizations which have established standards and testing methods for compostability, namely:

• American Society for Testing and Materials ASTM-D6400-04
• European Standardization Committee (CEN) EN13432
• International Standards Organization (ISO) ISO14855 (only for biodegradation)
• German Institute for Standardization (DIN) DIN V49000

The ASTM, CEN and DIN standards specify the criteria for biodegradation, disintegration and eco-toxicity for a plastic to be called compostable.

• Biodegradability is determined by measuring the amount of CO₂ produced over a certain time period by the biodegrading plastic. ASTM, ISO and DIN standards require 60% biodegradation within 180 days. The EN13432 standard requires 90% biodegradation within 90 days.
• Disintegration is measured by sieving the material to determine the biodegraded size and less than 10% should remain on a 2mm screen for most standards.
• Eco toxicity is measured by having concentrations of heavy metals below the limits set by the standards and by testing plant growth by mixing the compost with soil in different concentrations and comparing it with controlled compost.

In the USA, the BPI (Biodegradable Products Institute) certifies bioplastics under the ASTM-D6400-04 standard for "compostable plastics" and awards their logo to products which pass this certification.

The Natureworks resin is certified by BPIWorld.Org.

This article is from World Centric's website www.worldcentric.org.